0022

halo3 · **Joined:** Wed Feb 03, 2010 8:56 pm **Posts:** 42

Hey so I'm having trouble with now 2 360s that show 0022. One was rrod after 5mins and found the thing full of dust cleaned it and it ran for 2hours straight no problems. So I add on the hyrbrid just to be safe and so it powers on but overheats, so i make it a little tighter and now it gives me this error. It shows up after 30-60secs of waiting and Ive played with the screws and I can't get it to work. Any ideas?

pure3d2 · **Joined:** Fri Feb 05, 2010 7:33 pm **Posts:** 7

halo3 wrote:

Hey so I'm having trouble with now 2 360s that show 0022. One was rrod after 5mins and found the thing full of dust cleaned it and it ran for 2hours straight no problems. So I add on the hyrbrid just to be safe and so it powers on but overheats, so i make it a little tighter and now it gives me this error. It shows up after 30-60secs of waiting and Ive played with the screws and I can't get it to work. Any ideas?

The board is badly warped. You need to do the low temperature bake for 3-5 hours to flatten it out.

halo3 · **Joined:** Wed Feb 03, 2010 8:56 pm **Posts:** 42

I wonder how that happened then? Or I guess it was like that? Also the hybrid advanced prevents flexing, it shouldn't cause it right, thats odd then. Anyways thanks I'll try it.

halo3 · **Joined:** Wed Feb 03, 2010 8:56 pm **Posts:** 42

Ok tried a low bake, then it showed the cpu overheating. I tighten the cpu a little and it gave me the error again. So I guess I found the problem at least. I will try a cpu reflow, but any other suggestions?

mjdo · **Joined:** Sat Jul 10, 2010 2:31 am **Posts:** 1

is the low bake just to flaten the motherboard?

big werm · Posted: Tue Jul 13, 2010 10:09 pm

mjdo wrote:

is the low bake just to flaten the motherboard?

it also removes any moister tht may be traped in the mobo

RepairXbox360PS3Wii · **Joined:** Mon Jan 17, 2011 6:41 pm **Posts:** 14

big werm wrote:

mjdo wrote:

is the low bake just to flaten the motherboard?

it also removes any moister tht may be traped in the mobo

this is true, but typically using a standard heat profile with a preheater (or griddle for those going the non-professional route) the moisture would dry it out in less than 30 minutes which would be roughly the time from heat up to cool down,

if too much heat was used in a "reflow" or some other process, then the brain of the CPU/GPU dies and can throw this 0022 code, we have seen it multiple times, thankfully not due to our work

hope this helps
RT

0022

Who is online